Made to cut the cord
Single blade structure
The blade is a single blade structure, through the NC equipment machining molding process, with better cutting strength and impact resistance.
Maintenance
- When opening the box, check whether the corresponding parts of the product have been coated with anti-rust oil;
- During use, avoid contact of the instrument with liquids (such as sweat, water, drinks, etc.);
- During operation at high altitude, try your best to protect the tool from falling;
- If conditions permit, you should regularly apply anti-rust oil to tools;
- After using the tool, you should store it in a protected place such as a tool box.
Anti-slip handle
PVC material, more comfortable, not falling off
Double PVC cover, inner layer for smooth surface, outer layer for matte surface, comfortable anti-slip;
Dipping process: the handle is dipped into the rubber compound in the adjusted molten state, Depending on the thickness of the shell, soak for the corresponding time and then take it out. The soaked resin can adhere along the outer wall of the product, tends to taper the handle closer to the blade tip, further ensuring that the sheath does not fall off.
Strip does not hurt the core Adjust the depth of the blade as desired
The stripping structure uses the original blade adjustment principle, and the rotary knob can adjust the blade depth,
Can be adjusted according to the outer diameter of different cables to ensure that the core is not damaged and the cable stripping is smoother.
Long enough, more comfortable
Lengthening the blade and handle makes cutting and stripping easier
